The system used by our Pressovac series casting machines was specially developped for dental labs where casting perfection is absolute: casting pieces have a very smooth surface, a very dense molecular structure and without defects like unproper filling,porosity and shrinkage.

Metal is inserted into the crucible and the flask positioned on the cradle inside the casting chamber.


CASTING CYCLE is fully automatic

The casting chamber is fully evacuated by vacuum before melting, followed by helium gas supply to create an inert atmosphere.Helium gas has an excellent gas fluidity which provides a cleaning effect of the molten metal and mould and guarantees a smooth filling of metal even of the most intricate patterns.The casting temperature is attained and low frequency pulses are given to vibrate and mix the molten metal by keeping it homogeneous. Temperature is controlled by an optical pyrometer up to 2100°C for platinum and steel and by an immersion type “S” thermocouple inside the graphite crucible up to 1450°C for gold,silver and bronze.

At this stage, just by pushing a button, the whole crucible/flask system will automatically rotate 90° and the metal, once poured in an homogeneous and controlled way into the flask, it is automatically pressurized to 4 bars by argon gas.This high and quick pressurization is indispensable to obtain a proper and homogeneous filling, even at low metal/flask temperatures, for gold, silver and bronze alloys and, above all, for platinum and special steels which have a very narrow melting interval, thus a very quick solidification. This results in a very smooth surface due to the effect of the vacuum and a dense, well compacted casting due to the “over pressure” of 4 bars, which benefits both thick and thin sections.


  • Extremely robust water-cooled casting chamber
  • Automatic tilt
  • Rapid pressurization up to 3 bar, permitting lower metal and flask temperatures


Most of our competitors machines have relatively weak casting chambers which cannot, thus, be pressurized up to 4 bar; gas pressure has to be applied slowly to the molten metal after pouring.This necessitates significant raising of both flask and metal temperatures in order to achieve adequate filling, leading to porosity and rough surface problems due to these high temperatures. Also – the manual tilt which is also a feature of other machines can lead to inadequate filling due to slow pouring or, alternatively, metal spillage due this this being too rapid.



A100.566Graphite crucible cemented with its container for gold and silver (20 cc)
A100.509Lid cover for crucible
A100.580Graphite thermocouple sheath
A083.051Thermocouple type “S” for 1450 °C
P05046Melting coil (3648)
P005064Crucible holding plate complete with crucible lid cover holder mechanism

Pt/Pd/Steel KIT

A100.559Ceramic crucible for platinum (10 cc)
A100.564Silicon carbide crucible for steel (20 cc)
P05020Melting coil (3645)
P05097Crucible holding plate complete with crucible lid cover holder mechanism

PRESSOVAC DUAL PYROMETER will be supplied outfitted with one kit choosen by customer. Extra kits on request must be ordered separatly


This compact machine, complete with oven and investment mixer,occupies no more than a space measuring 60 x 160 cms on a bench top and offers the facility of performing their own casting to goldsmiths, jewellery designers and small studios. An ideal way to produce individual castings from rapid-prototyping.